Product Characteristics-Luoyang North Glass Sinest Technology Co., Ltd.

Home > Product

Product introduction

The decorative layer and the microcrystalline foam of the Sinest board are integrated sintering at high temperatures. The decorative layer is dense microcrystalline structure, and has the properties of microcrystalline stone. The microcrystalline foam is microcrystalline honeycomb structure, and has the excellent performance better than existing inorganic foam material. Performances of both materials complement each other and constitute the unique superior characteristics.

The performance of Sinest board is the material self-generated. It has different performance index depending on its different crystal structure and density.

Item		Claim
		Md2	Md3	Md4	Md5	Md6	Md8	Md10
Density /(kg/m³)		≤200	≤300	≤400	≤500	≤600	≤800	≤1000
Strength Rating		MU1.5	MU3.0	MU4.5	MU6.0	MU8.0	MU10	MU15
Thermal Conductivity /[W/(m•K)]		≤0.078	≤0.11	≤0.15	≤0.18	≤0.25	≤0.30	≤0.40
Water absorption rate /%		≤5.0		≤4.0		≤3.0		≤2.0
Combustion Performance Rating		A1 level
Radioactivity		Meet the requirements of GB 6566 building materials
Sound Insulation /dB		≥32	≥35	≥38	≥40	≥41	≥42	≥44
Bending Damage Load /（KN/m²）		≥0.5	≥1.0	≥1.5	≥2.0	≥2.5	≥3.0
Impact Resistance / frequency		≥5
Hanging force /N		≥1000
Frost resistance	Hot summer and warm winter area	F15
	Hot summer and cold winter area	F25	Mass loss rate≤5% Strength loss rate≤20% After freeze-thaw cycles, stratified, off skin, cracking, missing corners and other freezing phenomena are not allowed.
	Cold area	F35
	Severe cold area	F50

（Tab：Performance Index of Sinest Board）

Lightweight & High Strength

Due to light weight, it can float on the surface year-round. Relatively intensity is high. Its strength to weight ratio is 4 times of cement, 8 to 11 times of foam ceramic and foam cement.

Thermal Insulation, Soundproof

The lowest thermal conductivity is up to 0.057w/m.k. The material with 0.3g/cm3 proportion has more than 50 db sound insulation.

Fireproof And Combustion Hindrance

Fire rating is A1. Resistant ablation degree is more than 50 times the national standard. Refractory temperature is the highest in inorganic foam products, that about 1.5～2 times the foam ceramic and foam cement.

NO	Test items	Testing method	Standard requirement		Test result
NO	Test items	Testing method	Standard requirement			Sinest board
1	Furnace temperature rise，℃	GB/T5464-2010	A1	≤30	2	3
2	Continuous burning time，s	GB/T5464-2010		0	0	0
3	Mass loss rate，%	GB/T5464-2010		≤50.0	22.3	0.7
4	Calorific value，MJ/kg	GB/T14402-2007		≤2.0	0.2	0.1

（Tab：Fire resistance of Sinest board）

Hydrophobic, Corrosion-Resistant, Anti-Weathering

It belongs to the hydrophobic material at the molecular structure level. Closed porosity is up to 75% or more. Has anti-corrosion level as acid brick.

Decoration Integration, Health And Environmental Protection

Thanks to the unique decorative surface integrated sintering technology and the excellent functional gradient characteristics, Sinest board has the all the functions except for load of traditional wall. The product raw material itself is the existing environmental waste. It basically does not contain radioactive elements, after high temperature crystallization. Waste from production and application can be recycled.